Alkalinity PLUS 1.4 Kg for swimming pools and hot tubs

Dosage: 24 g of the product will increase the alkalinity in 1 m3 of water by (0.35 mmol/l = 35 ppm. Dose the measured dose of the product directly along the wall of the pool or whirlpool. We continuously check the alkalinity and pH values ​​with a tester. In general, it can be said that hard water requires a higher dose and soft water a lower dose.

Properties: The preparation Alkalita plus is a fine white powder, slightly soluble in water.

Safety and first aid: do not eat, drink or smoke when working with the product. Do not mix with other chemicals. Keep spills away from drains and water sources. Minimize dust content in the work environment. Fire and thermal decomposition may produce toxic carbon oxides. Avoid working with acids (carbon dioxide is released), with 2-phenylaldehyde (risk of ignition) and with ammonium phosphate (violent reaction). In case of skin contact, wash with soap and plenty of water.

In case of inhalation, move victim to fresh air. In case of eye contact, flush with plenty of water for 10-15 minutes. In case of accidental ingestion, rinse mouth with water. In case of further difficulties, consult a doctor and show the label. Remove soiled or soaked clothing. Read the instructions before use. The manufacturer is not liable for damage caused by improper use. Use the product only for its intended purpose.

Composition: sodium bicarbonate 99.5 g/100g