ANKER Bathroom Shine Bathroom Cleaner, 500 ml
Bathroom Shine is a versatile product that cleans, disinfects, and removes limescale in one step. It is designed for cleaning and disinfecting sanitary surfaces. It is suitable for washing shower cabins, bathrooms, sinks, faucets, kitchen sinks, tiles, bathtubs, stainless steel, ceramics, stoneware, glass, toilets, and other sanitary surfaces.
Bathroom Shine is a universal agent that cleans, disinfects and removes limescale in one step. It is intended for cleaning and disinfection of sanitary surfaces. It is suitable for washing showers , bathrooms , sinks , batteries , kitchen sinks , tiles , bathtubs , stainless steel , ceramics , stoneware , glass , toilets and other sanitary surfaces .
It perfectly removes limescale and stubborn deposits. It leaves a shine and a fresh scent on cleaned surfaces. It creates a protective film that prevents the subsequent deposition of dirt and scale.
The product can be used for both domestic and professional operations: households, sports facilities, accommodation, gastro establishments, swimming pools and wellness centers.
Approximate yield: 100 ml / m 2 (consumption of the product also depends on the degree of pollution and the method of application)
Preparation before application: to achieve the desired results, it is necessary to follow the prescribed application procedure. Apply at a temperature of 15 to 30 °C. It is not suitable to apply the product to surfaces heated by sunlight and other heat sources.
Due to the wide range of surfaces, we recommend that you carry out a TEST for the compatibility of the surface treatment before your own application.
Do not use the product on surfaces made of limestone, marble or travertine. There is a risk of damaging them!
THE PREPARATION IS READY FOR DIRECT USE!
Method of application: use protective equipment when applying. Follow the usual safety and health precautions at work. Wash your hands during breaks and at the end of work.
- Shake the cleaning solution thoroughly before use and apply evenly.
2. Apply the product to the contaminated surface and let it act for a few minutes.
3. Remove dirt with a cloth or sponge and wash with water.
4. If necessary, repeat the procedure.
Subsequent surface protection with ANKER CARE products
We recommend combining the cleaned substrate with NANO surface protection , on which an ultra-thin hydrophobic layer is formed after application with protection against subsequent oil and grease contamination, ensuring a reduction in the subsequent deposition of coatings and dirt.
Nano applications for subsequent use:
NanoOne – nano hybrid impregnation of glass, ceramics, plastic and metal
Storage: Consume within 36 months from date of manufacture. Store in the original and well-closed packaging at a temperature of 5 to 30 °C, protect from sunlight and frost.
Disclaimer: The information in this data sheet is based on our best knowledge and practical experience. Since the product is used outside of our control, we cannot guarantee its correct use. The manufacturer is not liable for any damage caused by improper use or storage. Follow the application procedure and use our technical support in case of questions
Additional parameters
| Category: | Chemistry - cleaning and maintenance |
|---|---|
| Weight: | 0.5 kg |
Be the first who will post an article to this item!
