ANKER Cement Remover, cement remover, 500 ml
Cement Remover is a highly effective cleaner designed to remove residues of building materials such as concrete, mortar, cement grout, cement efflorescence, limescale, etc.
Cement Remover is a highly effective cleaner designed to remove the remains of building materials such as concrete, mortar, cement grout, cement efflorescence, scale, etc.
A great helper designed for : ceramic tiles, stone walls and fences, sculptures, stone tiles and paving, concrete elements, burnt bricks and roof tiles
Suitable for a wide range of surfaces: ceramics, natural stone (granite, sandstone, slate, quartzite, gneiss, kavala, etc.), artificial stone (terraco), concrete and facade systems (paints and plasters), fired bricks (clinker strips and bricks) , roofing
The product can be used for both domestic and professional operations: brickworks, gardening, construction companies, cleaning and implementation, etc.
Approximate yield: 100 ml / m 2 (consumption of the product also depends on the degree of pollution and the method of application)
Personal protective equipment: wear protective equipment such as gloves and protective clothing during application. Follow the usual safety and health precautions at work. Wash your hands during breaks and at the end of work. If applying indoors, pay particular attention to good ventilation of the space. This can only be achieved by local exhaust or effective general ventilation. If it is not possible to comply with the NPK-P limits, it is necessary to use suitable devices for the protection of the respiratory system.
Preparation before application: to achieve the desired results, it is necessary to follow the prescribed application procedure. Apply at a temperature of 15 to 30 °C. It is not suitable to apply the product to surfaces heated by sunlight and other heat sources.
Due to the wide range of surfaces, we recommend that you carry out a TEST for the compatibility of the surface treatment before your own application.
Do not use the product on surfaces made of limestone, marble or travertine. When applying, avoid contact with metals (stainless steel, steel, aluminum, brass, copper, etc.). There is a risk of damaging them!
THE PREPARATION IS READY FOR DIRECT USE!
Before application, we recommend removing loose dirt from the treated surface (this will significantly reduce the consumption of the product)
- Shake the cleaning solution thoroughly before use and apply evenly.
2. Apply the product to the contaminated surface and let it act for a few minutes.
3. Remove dirt with a cloth or sponge and wash with water.
4. If necessary, repeat the procedure.
Subsequent surface protection with ANKER CARE products
We recommend combining the cleaned substrate with NANO surface protection , on which an ultra-thin hydrophobic layer is formed after application with protection against subsequent oil and grease contamination, ensuring a reduction in the subsequent deposition of coatings and dirt.
Storage: Consume within 36 months from date of manufacture. Store in the original and well-closed packaging at a temperature of 5 to 30 °C, protect from sunlight and frost.
Disclaimer: The information in this data sheet is based on our best knowledge and practical experience. Since the product is used outside of our control, we cannot guarantee its correct use. The manufacturer is not liable for any damage caused by improper use or storage. Follow the application procedure and use our technical support in case of questions
Additional parameters
| Category: | Chemistry - cleaning and maintenance |
|---|---|
| Weight: | 0.5 kg |
Be the first who will post an article to this item!
