ANKER Nano AntiPrint, fingerprint protection, 500 ml

Nano AntiPrint impregnation coating containing SIO2 nano particles intended for the application of metal materials such as stainless steel (stainless hoods, stainless steel sinks, stainless steel elevators, stainless steel railings, stainless steel tables, stainless steel grill, stainless steel mailboxes, stainless steel doors, etc.), chrome (water faucet, shower heads, bathroom accessories), brass (handles, door fittings), copper (water faucets, gutters, statues), etc.

After applying Nano AntiPrint, a protective coating is formed on the treated material , which protects the substrate from weather, UV radiation and water, restores the shine and subsequently protects against pollution (especially from handprints). By treating the surface, you restore the shine without laborious polishing . By applying the product, you create an ultra-thin hydrophobic layer that protects the surface from subsequent pollution, handprints, the deposition of mineral and calcium deposits and even from the formation of water rust. The use of Nano AntiPrint restores the appearance of even old anodized surfaces and removes color deviations arising after cleaning.

Nano AntiPrint is suitable for use in households and professional operations, but also in the machinery or construction industry.

• A greasy film does not form on the treated surface
• Protects against sticking fingerprints and hands
• It facilitates subsequent cleaning of the treated surface with common cleaning products
• A hydrophobic layer forms on the surface
• Low product consumption (approx. 10 ml/m2)

Nano AntiPrint is a nano preparation developed for the protection and restoration of the surfaces of materials such as: anodized aluminum, stainless steel, zinc, copper, brass, etc. It creates an ultra-thin layer designed to protect metals and lacquered materials, preventing the formation of fingerprints.

Personal protective equipment: wear protective equipment such as gloves and protective clothing during application. Follow the usual safety and health precautions at work. Wash your hands during breaks and at the end of work.

Preparation before application: the surfaces you want to treat must be completely dry, free of all dirt and residues of cleaning products. It is not suitable to apply the product to surfaces heated by sunlight, the temperature of the surface should not exceed 30 °C.

Due to the wide range of surfaces, we recommend that you carry out a TEST for the compatibility of the surface treatment before your own application.

THE PREPARATION IS READY FOR DIRECT USE!

Substrate preparation: if the material is already in use, the treated surface must be thoroughly cleaned. According to the pollution tip, we always choose the right cleaner!

Application on a NEW SURFACE

1. The surface must be thoroughly cleaned before application. For perfect cleaning, we recommend Stainless Steel Cleaner .
   2. Subsequently, you apply the protective nano product NanoAntiPrint . Shake thoroughly before use and apply evenly. Spread the liquid immediately and polish off any smudges that may have formed. About 3-4 hours after application, the applied layer dries completely and becomes active.

Application on already USED SURFACE

1. Clean the surface with appropriate deep cleaners. We choose the cleaner according to the type of pollution. The more thoroughly the surface is cleaned, the better and long-lasting effect we will subsequently achieve. Then rinse with water and wipe dry.
   2. For perfect cleaning, we recommend Stainless Steel Cleaner . If the surface is perfectly clean, there is no need to use this cleaner.
   3. You apply the protective nano product NanoAntiPrint . Shake well before use and apply evenly. Spread the liquid immediately and polish off any smudges that may have formed. About 3-4 hours after application, the applied layer dries completely and becomes active.

Maintenance: We recommend using cleaning products with a neutral pH7 on treated surfaces. To revive the nano coating, we recommend degreasing the surface with Stainless Steel Cleaner . The restoration of the old nano coating is carried out in the same way as the application of previous coatings.

Storage: Consume within 24 months from date of manufacture. Store in the original and well-closed packaging at a temperature from 5°C to 30°C, protect from sunlight and frost.

Marking in accordance with EU Regulation no. 1272/2008: Not classified as a dangerous mixture.

Disclaimer: the information in this data sheet is based on our best knowledge and practical experience. Since the product is used outside of our control, we cannot guarantee its correct use. The manufacturer is not liable for any damage caused by improper use or storage. Follow the application procedure and use our technical support in case of questions