ANKER Nano Glass Cleaner NanoDrop, 500 ml

NanoDrop is a nano cleaner and nano protection in one, intended for showers . The preparation creates an ultra-thin, highly hydrophobic nano layer on the treated surface , which protects the material from external adverse effects such as scale, dirt and grease residues.

NanoDrop creates an ultra-thin nano layer on the surface of the treated material , which is fully transparent, without an oily film . NanoDrop also serves as a maintenance and regeneration agent for the already formed nano layer. The application saves time and costs for routine surface maintenance.

The life of the protective layer can reach up to 3-6 months. The durability of the layer depends on the correct application and the degree of mechanical stress.

• The treated surface is fully transparent, without signs of an oily film
• Protects against adhesion of dirt and scale
• It facilitates subsequent cleaning of the treated surface
• The surface of the treated material is hydrophobic

We can treat with the Nano preparation NanoDrop

• shower cubicles, shower boxes, shower doors, shower screens
• faucet, shower faucet, shower panel
• bathtubs, shower trays, sinks
• ceramic tiles

How to apply nano cleaner in NanoDrop impregnation

Use protective equipment such as gloves and protective clothing when applying. Follow the usual safety and health precautions at work. Wash your hands during breaks and at the end of work.

To achieve the desired results, it is necessary to follow the prescribed application procedure. Work at temperatures above 15°C. The surfaces you want to treat must be completely dry, free of all dirt and residues of cleaning products. It is not suitable to apply the product to surfaces heated by sunlight, the temperature of the surface should not exceed 30 °C.

Due to the wide range of surfaces, we recommend that you carry out a TEST for the compatibility of the surface treatment before your own application

THE PREPARATION IS READY FOR DIRECT USE! 

Application on a NEW SURFACE

1. To achieve the maximum result, it is necessary to use clean application aids. We recommend using a microfiber or non-woven cloth
   to apply NanoDrop . 2. Apply in a fine film using a hand sprayer and then spread evenly. Proceed systematically along the surface (from left to right, then up and down). Polish off any smudges that may have formed.
   3. After about 30 min. (at an air temperature of around 20 °C) the applied layer dries completely and becomes water resistant.

Application on already USED SURFACE

If the material is already used, the treated surface must be thoroughly cleaned.

1. Clean the surface with appropriate deep cleaners, e.g. WATER STAIN CLEANER - Scale and rust cleaner. The more thoroughly the surface is cleaned, the better and long-lasting effect we will subsequently achieve. Then rinse with water and wipe dry.
   2. To achieve the maximum result, it is necessary to use clean application aids. We recommend using a microfiber or non-woven cloth
   to apply NanoDrop . 3. Apply in a fine film using a hand sprayer and then spread evenly. Proceed systematically along the surface (from left to right, then up and down). Polish off any smudges that may have formed.
   4. After about 30 min. (at an air temperature of around 20 °C) the applied layer dries completely and becomes water resistant.

NanoDrop nano coating

For subsequent maintenance, we recommend using the nano product NanoDrop , thereby prolonging the functionality of the already created nano layer. Never use abrasive, acidic or alkaline substances for cleaning! It is necessary to take into account the fact that after about 5 washes the impregnation will be removed. Therefore, we recommend treating the surface again with NanoDrop .

Consume within 36 months from date of manufacture. Store in the original and well-closed packaging at a temperature of 5 to 30 °C, protect from sunlight and frost. The manufacturer is not liable for any damage caused by improper use or storage.

The information is based on our best knowledge and practical experience. Since the product is used outside of our control, we cannot guarantee its correct use. The manufacturer is not liable for any damage caused by improper use or storage. Follow the application procedure and use our technical support in case of questions