ANKER Stainless Steel Cleaner stainless steel cleaning, 500 ml
Stainless Steel Cleaner is a highly effective cleaner for stainless steel surfaces, perfectly removing grease residues and fingerprints from the surface. It is an excellent helper in households, gastronomy, and cleaning operations. It leaves behind a perfectly clean, shiny, and non-greasy surface.
Stainless Steel Cleaner is a highly effective stainless steel surface cleaner that perfectly removes grease and fingerprints from the surface. A great helper in the home, catering and cleaning operations. It leaves behind a perfectly clean, shiny and non-greasy surface.
The preparation is ECOLOGICAL and FRIENDLY for the environment.
A great helper intended for : kitchen appliances, extractor hoods, stainless steel work tables, sinks, elevators, railings, stainless steel tanks, stainless steel pools, stainless steel bathtubs, etc.
Suitable for a wide range of surfaces: stainless steel surfaces
The product can be used for both domestic and professional operations: households, apartment buildings, gastro and food establishments, hotels, boarding houses, wellness centers, swimming pools, sports centers, shopping centers, state institutions, engineering operations, etc.
Approximate yield: 100 ml / m 2 (consumption of the product also depends on the degree of pollution and the method of application)
Personal protective equipment: wear protective equipment such as gloves and protective clothing during application. Follow the usual safety and health precautions at work. Wash your hands during breaks and at the end of work.
Preparation before application: to achieve the desired results, it is necessary to follow the prescribed application procedure. Apply to a slightly damp surface and at a temperature of 15 to 30 °C. It is not suitable to apply the product to surfaces heated by sunlight and other heat sources.
Due to the wide range of surfaces, we recommend that you carry out a TEST for the compatibility of the surface treatment before your own application.
THE PREPARATION IS READY FOR DIRECT USE!
Method of application: use protective equipment when applying. Follow the usual safety and health precautions at work. Wash your hands during breaks and at the end of work.
- Shake the cleaning solution thoroughly before use and apply evenly.
2. Apply the product to the contaminated surface and let it act for a few minutes.
3. Wipe off dirt with a cloth and then polish to a shine
4. If necessary, repeat the procedure.
Subsequent surface protection with ANKER CARE products
We recommend combining the cleaned substrate with NANO surface protection , on which an ultra-thin hydrophobic layer is formed after application with protection against subsequent oil and grease contamination, ensuring a reduction in the subsequent deposition of coatings and dirt.
Storage: Consume within 36 months from date of manufacture. Store in the original and well-closed packaging at a temperature of 5 to 30 °C, protect from sunlight and frost.
Disclaimer: The information in this data sheet is based on our best knowledge and practical experience. Since the product is used outside of our control, we cannot guarantee its correct use. The manufacturer is not liable for any damage caused by improper use or storage. Follow the application procedure and use our technical support in case of questions
Additional parameters
| Category: | Chemistry - cleaning and maintenance |
|---|---|
| Weight: | 0.5 kg |
Be the first who will post an article to this item!
