ANKER UNIVERSAL CLEANER, universal cleaner and degreaser, 500 ml

UNIVERSAL CLEANER is intended for cleaning and degreasing non-porous surfaces . It perfectly removes grease and other stubborn dirt. It evaporates quickly and leaves no streaks! It achieves excellent results as a degreaser before sticking stickers, applying paints and nano preparations. Suitable for cleaning glass , plastic , metal , ceramics and high gloss surfaces.

• Does not leave streaks
• Effectively removes grease, dirt and other stubborn dirt
• Universal use on all non-porous surfaces
• Suitable as a cleaner before applying nano protection

UNIVERSAL CLEANER is intended for everyday use both at home and in professional operations. Suitable for cleaning: phones, tablets, PC monitors, TVs, mirrors, glass products, protective plexiglass shields, glasses, crystal, ceramic and stainless steel materials, lacquered surfaces and other hard smooth surfaces.

Approximate yield: 50 ml / m ² (consumption of the product also depends on the degree of pollution and the method of application)

Preparation before application: to achieve the desired results, it is necessary to follow the prescribed application procedure. Apply at a temperature of 15 to 30 °C. It is not suitable to apply the product to surfaces heated by sunlight and other heat sources.

Due to the wide range of surfaces, we recommend that you carry out a TEST for the compatibility of the surface treatment before your own application.

THE PREPARATION IS READY FOR DIRECT USE!

Method of application: use protective equipment when applying. Follow the usual safety and health precautions at work. Wash your hands during breaks and at the end of work.

1. Apply the cleaning solution using a sprayer directly on the surface or on a cloth.
   2. If necessary, repeat the procedure.

Subsequent surface protection with ANKER CARE products

We recommend combining the cleaned substrate with NANO surface protection , on which an ultra-thin hydrophobic layer is formed after application with protection against subsequent oil and grease contamination, ensuring a reduction in the subsequent deposition of coatings and dirt.

Nano applications for subsequent use:

N anoOne - Nano hybrid impregnation of glass, ceramics, plastic and metal

Storage: Consume within 36 months from date of manufacture. Store in the original and well-closed packaging at a temperature of 5 to 30 °C, protect from sunlight and frost.

Marking in accordance with EU Regulation no. 1272/2008

DANGER: Contains: propan-2-ol. Highly flammable liquid and vapor. Causes serious eye irritation. May cause drowsiness or dizziness. If medical attention is needed, have the product packaging or label on hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. Use only outdoors or in well-ventilated areas. Store locked up. Dispose of the contents/packaging by handing it over to an authorized person for waste management or returning it to the supplier. Composition according to Regulation (EC) no. 648/2004, as amended: >=30% Propan-2-ol

Disclaimer: The information in this data sheet is based on our best knowledge and practical experience. Since the product is used outside of our control, we cannot guarantee its correct use. The manufacturer is not liable for any damage caused by improper use or storage. Follow the application procedure and use our technical support in case of questions