ANKER Water Stain Cleaner, Wassersteinentferner, 500 ml
Water Stain Cleaner is a cleaning product that effectively and gently removes heavy limescale deposits, mineral buildup, metal oxidation, rust, and other stubborn dirt. The product is suitable for cleaning materials that cannot be cleaned with acidic cleaners due to the risk of damaging stainless steel and aluminum. Its unique gel-like consistency prevents dripping and allows for a longer cleaning reaction.
Water Stain Cleaner is a cleaning product that effectively and gently removes STRONG scale deposits , mineral deposits, metal oxidation, rust and other resistant impurities. The product is suitable for cleaning materials that cannot be cleaned with acid cleaners due to the possibility of damage to stainless steel and aluminum. Its unique semi-gel consistency does not run and allows for a longer cleaning reaction.
A great helper designed for : shower corners, shower screens, shower doors, shower boxes, shower trays, shower drains, sink faucets, bathtub faucets, shower faucets, sink faucets, bidet faucets, tiles, tiles, mosaics, luxfers, facing stone, sinks , WC, bidets, metal bathtubs, acrylic bathtubs, whirlpool bathtubs, stainless steel sinks, granite sinks, ceramic sinks, etc.
Suitable for a wide range of surfaces: glass, polycarbonate, plastic, stainless steel, copper, aluminum, brass, laminate, acrylic, ceramic, granite, sandstone, slate, quartzite, etc.
The product can be used for both domestic and professional operations: shops, toilets, wc , water parks, wellness centers, public pools, saunas, spas , spa operations, hotels, kitchens, gastro operations, etc.
Approximate yield: 100 ml / m 2 (consumption of the product also depends on the degree of pollution and the method of application)
Preparation before application: to achieve the desired results, it is necessary to follow the prescribed application procedure. Apply at a temperature of 15 to 30 °C. It is not suitable to apply the product to surfaces heated by sunlight and other heat sources.
Due to the wide range of surfaces, we recommend that you carry out a TEST for the compatibility of the surface treatment before your own application.
Do not use the product on surfaces made of limestone, marble or travertine. There is a risk of damaging them!
THE PREPARATION IS READY FOR DIRECT USE!
Method of application: Use protective equipment when applying. Follow the usual safety and health precautions at work. Wash your hands during breaks and at the end of work. If applying indoors, pay particular attention to good ventilation of the space. If it is not possible to comply with the NPK-P limits, it is necessary to use suitable devices for the protection of the respiratory system.
- Shake the cleaning solution thoroughly before use and apply evenly.
2. Apply the product to the contaminated surface and let it act for a few minutes.
3. Remove dirt with a cloth or sponge and wash with water.
4. If necessary, repeat the procedure.
Subsequent surface protection with ANKER CARE products
We recommend combining the cleaned substrate with NANO surface protection , on which an ultra-thin hydrophobic layer is formed after application with protection against subsequent oil and grease contamination, ensuring a reduction in the subsequent deposition of coatings and dirt.
Storage: Consume within 36 months from date of manufacture. Store in the original and well-closed packaging at a temperature of 5 to 30 °C, protect from sunlight and frost.
Disclaimer: The information in this data sheet is based on our best knowledge and practical experience. Since the product is used outside of our control, we cannot guarantee its correct use. The manufacturer is not liable for any damage caused by improper use or storage. Follow the application procedure and use our technical support in case of questions
Additional parameters
| Category: | Chemistry - cleaning and maintenance |
|---|---|
| Weight: | 0.5 kg |
Be the first who will post an article to this item!
