FLOCK sparkler 1l for hot tub and pool

Product detailed description

FLOCK – Polymer flocculant and sparkler

FLOCK is a liquid, concentrated product, intended for flocculation of small impurities and removal of water turbidity in the hot tub. It aggregates (flocculates) even very fine scattered impurities into larger aggregates, and these can then be filtered or sucked out with a pool vacuum cleaner. At the same time, it will give the water the required "spark".

Properties:

The highly efficient polymer flocculant is ideal in combination with chlorine-free WHIRLPOOL DISINFECTION, easy handling, slightly lowers the pH of the water.

Dosage:

Normal dosage (moderate flocculation) 5 ml/1 m3 of water, once every 10 days. For intensive flocculation of very polluted water 10-15 ml /1 m3 of water. Overdosing the pool can cause the water to become cloudy. In this case, it is necessary to dilute the water. Before actual dosing, we recommend checking and adjusting the pH of the water to values ​​of 7.2-7.6.

Safety and first aid:

Read the instructions before use.
P102 Keep out of reach of children.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and if they can be removed easily.
Continue rinsing.
P280 Wear protective gloves/protective clothing/safety glasses/face shield.
EUH210 Safety data sheet available on request.
Store at a temperature of 5 - 25°C in the original packaging. Protect from sunlight and heat. Protect from frost. Do not mix with other preparations. The manufacturer is not liable for damage caused by improper use. Use the product only for the intended purpose. Dispose of as non-hazardous (O) waste.