Gecko control unit in.ye - 0610-221045-338 - 3kW
Gecko control systems are perfect solution to enhance a level of your whirpool. Control systems are designed to perfectly fit and to be easily installed, they are connected with two pumps and equipment for SPA of all sizes and configurations. Control systems offer optimal output and full control. You will reach absolute happiness when using your spa and your expectations will be exceeded.
It offers optimal output and full control!
in.ye is a perfect solution to enhance level of your spa. in.ye control systems are designed to perfectly fit and to be easily installed, they are connected with pumps and equipment for SPA of all sizes and configurations.
in.ye is a perfect solution to enhance level of your spa
in.ye control systems are designed to perfectly fit and to be easily installed, they are connected with pumps and equipment for SPA of all sizes and configurations.
Maximum satisfaction
in.ye control systems offer optimal output and full control. You will reach absolute happiness when using your spa and your expectations will be exceeded.
in.ye control systems also offer possibility to add wireless control via a mobile phone, water cleaning, audio streaming and other possibilities to enhance quality of your spa experience.
Features
- It supports control panels, heating, lighting 12 V AC
- and configurable (2, 5 or 7 depending on a model type)
- Detection of water in solid state
- Waterproof design marked IPX5
- Pre-installed configuration allows quick and easy installation
- in.touch modul compatible with Wi-Fi
- It supports 1, 2 and 3 phase entry output
- Standard heating 3 kW
- Overheat control
- Self-diagnostics
- Programmable filter cycle
- Corossive-free cabinet
- Gecko IN.YE / ACM0755, ACM0756
Compatible with panels
IN.K120 Auxillary Panel, IN.K200, IN.K300, IN.K19, IN.K35, IN.K45, IN.K450, IN.K600 ST, IN.K500, IN.K800, IN.K1000, In.touch/In.touch2.
Specifications
- 5 connectors (two-speed motor uses 2 connectors) → Pump 1, Pump 2, Pump 3, Compressor, Circulation pump, Ozonizer
- Pump 1: two-speed
- Pump 2: single speed
- Compressor: 1×
- Ozonizer: 1×
- Lighting: 12W / 12V
- Heating: 3kW
Additional parameters
Category: | Control units Gecko |
---|---|
Warranty: | 2 years |
Weight: | 4.4 kg |
Brand: | Gecko |
Heater output: | 3.0kW - 3.9kW |
Model: | GECKO IN.YE (0610-221045-338) |
Rozměry: | 497 x 273 x 126 mm |
Kód produktu: | 0610-221045-338 |
Be the first who will post an article to this item!