Oceanic Steam generator – Steam generator for saunas 6kW – OC60B

Information

• Model: OC-60B 
• Oceanic introduces highly intelligent generator of the top serie OC-B.
• All models of this top serie are equipped with automatic mode of scale removal.
• Top quality steam generator OC-B is equipped with an intelligent digital regulator for control of automated steaming.
• System allows time-setting in intervals between 15 and 240 min, or ceaseless mode – non-stop operation without any timing.
• Temperature setting of steamer is displayed in the following figures: 30 to 60 degrees Celsius and Fahrenheit, or it is possible setting for home or public operation.
• Generator is also equipped with sequence system of heating which allows even extensive steaming.
• For advanced setting it is possible to use a digital signal of control mode with LED diagnostic.
• Other features are: overheat protection, and protection against dry water boiling in a vaporizer.
• Of course, there is included pressure control of 1.2BAR value with safety valve.
• System is equipped with the new technology of energy saving – the button ECO.
• This button is placed inside the cabin and if needed, it is ready for effective, economical and immediate steam temperature cut-down in a cabin.
• In order to ensure safety and long lifetime, the top line of generators OC,,B,, is equipped with intelligent system of heating spirals, so the highest positioned spiral can be heated as the last one if necessary.
• The highest spirals are the most used ones.
• The system of OC ,,B,, serie is also equipped with automatic decalcification program after each system turn-off and valve release.
• These models of the top serie offer automatic cleaning mode which operates on a basis of quick steaming, other practical features are low energetical operation adn output selection from 3kW to 18kW.
• 24– month-warranty.
• This model is approved and aligned with European norms and standards with CE quality certificate and suitable for commercial operation.
• Suitable for 16 Hour A Day Operation
• Fully Automatic Operation
• Day / Time Programmable
• Automatic Descaling
• Steam on Demand
• LCD Display With Detailed Diagnostics
• Button for Fan and Light Powered Off Main Circuit Board
• Large Bore Drain Valve with Easy Access Cap for large limescale deposits
• Package contains: a steam jet, a control panel with a cable, an economic buton ECO, a safety valve, a heating sensor and automatic system of decalcification.

Fully Automatic Operation – Once you have set the day and time the generator can be setup to heat at 2 different times per day or just on in the morning and off at night. Once this has been setup the generator will automatically turn on and off at these times each day. It is also possible to just have the generator operating on a standard countdown timer or continous operation.

Steam on Demand – For commercial operaters where the steam room is left empty for many hours through the day. Install a button outside of the steam room that users press when they want to use the room, each push of the button will give 30 minutes of steam. The generator holds the water in the tank at 85 ° C so that when the button is pushed the generator will steam instantly. Note – the user will have to wait for the room to heat up but in most cases this is not a problem, the use of bench heating is a solution to this.

Automatic descaling – From the keypad you can choose which day and time you want the descaling cycle to take place (for example sunday 00:00 – 7:00). The generator is supplied with a pump which pumps from a large container of premixed citric acid on the plant room floor. (We sell 25L or 120L drums) The generator will heat the acid so the reaction speeds up, it will drain down at the end of the cycle, you can choose how long you want the descale cycle to last but we advise no shorter than 4 hours. The generator will descale itself on the same day and time every week unless this option is turned off.

LCD Display – Our new back lit LCD display with clear symbols to explain if the generator is filling, heating, draining, cleaning itself or which heating mode it is in.

 Guide to building a steam room - PDF

Specification

• Voltage: 230/400 V
• Input: 6 kW
• Phase N~: 1/3
• Current A: 26,4/8,7
• Pressure protection: 1.2 BAR
• Room capacity: 4 – 6 m3
• Dimensions (l, w, h): 580×230×460 mm

Important

• Read the manual before installation and product operation.
• This device must be conneted to an insulating pole.
• This equippment must be installed by a competent person.
• Disconnect from power source, before manipulation with electrical contacts.
• Confirm the correct voltage for your steam generator 1 or 3 phases.

Safety precautions for steam spa

• Elder people, pregnant women or people with heart conditions, high blood pressure, diabetes or any other health conditions shall consult with an expert before steam spa use.
• In a steam room there is a smoking ban.
• Avoid entering the steam room after work-out.
• Do not use the steam room if under alcohol influence.
• Exit the steam room immediately if you feel drowsy, sick or any other discomfort.
• Ensure the steam rooom to be properly ventilated.
• It is not recommended that this product is used by people younger 16 years.
• For commercial use the operator should place these safety precautions visibly to inform users.

SPA Components has completed full training of Oceanic steam generators and we have all spare parts available for service. Therefore, we provide a complete post-warranty service on site at the customer throughout the country. You can also send the steam generators to our branch or we can organize the transport yourself.